I've been wandering aimlessly around the internet looking for scale roof vents, but haven't found any that seem to work for G. I've seen any number of HO and O scale vents, but almost nothing that's an appropriate size for 1:24 / 1:22.5. I thought that perhaps the "garage diorama" people would sell these, but so far no luck.
I'm specifically interested in the "whirly bird" type... though I'd settle for some "bin" type vents, too.
They would be difficult to make by hand but you could use a modified Dremel type ball deburring tool as a master and make a silicone mold. The one below is is 5/16 ball so perhaps a little small for 1:24. I'm sure they come larger though.
The larger ones look just the part but probably very expensive... Just a thought.
They would be difficult to make by hand but you could use a modified Dremel type ball deburring tool as a master and make a silicone mold. The one below is is 5/16 ball so perhaps a little small for 1:24. I'm sure they come larger though.
Look up Discout Jewelry Supply, you can get those Ball Burrs separately in many sizes. Go for 10% over size if you mold one. Comes with a good sprue too!
John
I've seen coarser ball burrs.
What size do you want?
The gem show is due in town next week, suppliers set up shop around town, I was going for some new trim blades (rock), I could look to see what's there.
John
The ones I've seen are 12" in 1:1, so I was thinking somewhere around 1/2" diameter ball. I didn't see any that large when I looked into jewelry supplies on-line. The largest I came across was 10mm.
Jewelry suppliers do seem to have coarser burs than metal working suppliers--perhaps because they are used for working in wax? The coarser the better, obviously--a lot of those "turbine" vents I've seen have between 16 and 20 fins, so if there was something that coarse, it would look a little more correct.
Largest I found at my online supplier was 11.1 mm
but Grangers has 'em 1/2 and 1"
http://www.grainger.com/product/WIDIA-METAL-REMOVAL-Double-Cut-Carbide-Bur-WP55344/_/N-pc8?s_pp=false&picUrl=//static.grainger.com/rp/s/is/image/Grainger/1Z294_AS01?$smthumb$
John, double cut ones don't look right.
I mentioned it to a friend who models stuff on ShapeWays.
It's not a simple thing to model but software may do it easy.
He is having a go at it. Various scales.
The domestic ones are about 15" or so with about 18 vanes but industrial ones are maybe 24" with more. Not sure exactly. They are probably all different depending on manufacturer.
They should also have a bent lower section because of the way they are made to accommodate slopes (small problem because ellipses can be bent back to circles with tin but not with solids).
There are barrel ones too with straight vanes. Perhaps they were around in earlier days.
I will post back soon if he gets it together.
I purchased some burrs at the annual Midwest Old Settlers and Threshers Reunion in Mt. Pleasant, Iowa, in the "Tool Tent" in the last few years. They are usually loose in a 'grab-box' of many different sizes and shapes and I thought they were awfully expensive at $6 to $8 each... I didn't realize what the really cost! Of course being just piled in a box with no protection from being banged into other carbide bits is sort of hard on the cutting edges, so I question if they are maybe factory rejects to begin with and that is why they are some much cheaper than what we are seeing on-line.
I have one round/ball one that is 0.75-inches in diameter. Unfortunately, it is a "double-cut" so "vanes" cast from a mold made from it would have some ugly jaggies. But even at 1:32 scale that would be a 24-inch diameter vent. In other "G" scales it would represent vents that are even bigger!
Semper, 0.75" would be 24" in 1:32 and about 15" in 1:20.32.
I think it would be a perfect size for all round usefulness in various Large Scales.
Andrew
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
G Scale Model Train Forum
450.1K posts
25.7K members
Since 2007
A forum community dedicated to G scale model train owners and enthusiasts. Come join the discussion about collections, displays, models, styles, scales, reviews, accessories, classifieds, and more!