A Message From Barry Olsen/Barry's Big Trains/How Is Yours Doing? - myLargescale.com > Community > Forums

Reply
 
LinkBack Thread Tools
Old 06-29-2017, 04:57 AM   #1 (permalink)
Junior Member
 
Railroadinovations's Avatar
 
Join Date: Feb 2009
Location: E.Helena, MT
Posts: 23
Smile A Message From Barry Olsen/Barry's Big Trains/How Is Yours Doing?

Greetings to the large scale community!
Barry and I would like to find out how all the locomotive conversions out there are doing, along with any stories, concerns, photos, videos, etc.
Barry would like a positive or negative update on your locomotive wether it be a consolidation, 4-6-0, 2-8-0, custom conversation, (like the LGB 2-6-0 in the photos) or if you have seen his equipment run elsewhere and have comments.
He would also like to know if there have been any problems.
Barry has ask me as a friend to post these requests at this time due to his lack of Internet access where he currently resides.
Look forward to hearing from everyone!


A message from Barry!

THE FOLLOWING LETTER IS A MESSAGE WRITTEN DIRECTLY BY BARRY HIMSELF AND SENT TO ME TO POST HERE. IT EXPLAINS HIS CURRENT, PAST AND FUTURE IN THE LARGE SCALE COMMUNITY.

Fellow Large Scale Enthusiasts;
In this memo I will try to explain my performance in the last few years. In 2005 I received my first pacemaker and the second in 2011 which I still have today.

Then in 2014 it was determined that I had prostate cancer. As a result I went through a massive series of successful radiation applications which took a lot out of me.
A loss of balance has also plagued me for the past 5 years which caused some falls, but I am not falling down any longer. A lot of my strength is gone but I still have enough to do occasional work in the shop, just a bit slower. Can't play and swim anymore!!

Furthermore, the health care I have been receiving for these conditions over the past 15 years has been impressive and I can proudly say that I just turned 81 years old, June 10th.

For this reason the shop is/has been neglected lately, but has been productive in the 10 years prior to the cancer invasion.
Currently I am trying to replace some part items which are in short supply or are out. One aluminum 16 tooth gear is essential, so I tried to order a count of 25, but there is a seven to eight week lead time.
Also, the siderods, which are laser cut stainless steel are in short supply.
They have to be ordered 100 at a time in each style; three post and four post (4-6-0 and 2-8-0).
NOTE; I do make a 2-8-0 conversion to the conventional Bachmann 4-6-0 which is pretty cool.
I also produce a replacement drive for the Bachmann 2-8-0 consolidated locomotive.

I wish to let everyone know that I am still here and can attend to most of what the market needs.
If you need your locomotive fixed or need parts or a drive, feel free to call me at the number below.

Wishing you all the best and Thank You for your support over the years and in the future.

Sincerely, Barry Olsen



Barry's Big Trains 623-936-6088

Barry's Big Trains &
Imagination Station Kids On Track
Attached Images
File Type: jpg 2017-06-29 03.21.15.jpg (206.0 KB, 53 views)
File Type: jpg 2017-06-29 03.49.00.jpg (249.3 KB, 52 views)
File Type: jpg 2017-06-29 03.56.12.jpg (213.7 KB, 48 views)

Last edited by Railroadinovations; 06-29-2017 at 05:58 AM.
Railroadinovations is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-01-2017, 08:17 PM   #2 (permalink)
Senior Member
 
Join Date: Jan 2008
Location: Alaska
Posts: 934
Default

I'd wondered what became of Barry.

I believe I shall take him up on that offer.
ThinkerT is offline   Reply With Quote Quick reply to this message
Old 07-05-2017, 10:51 PM   #3 (permalink)
Senior Member
 
Treeman's Avatar
 
Join Date: Jan 2008
Location: Ankeny, IOWA
Posts: 1,862
Default

Good to hear that you are back in the shop. I know of your work, but not much direct experience.
__________________
Mike
Reindeer Pass Garden Railroad Supply
Treeman is offline   Reply With Quote Quick reply to this message
 
Old 07-05-2017, 11:48 PM   #4 (permalink)
Senior Member
 
Join Date: Jan 2008
Location: Alaska
Posts: 934
Default

I sent a few locomotives his way today.
ThinkerT is offline   Reply With Quote Quick reply to this message
Old 07-06-2017, 01:03 PM   #5 (permalink)
Member
 
Join Date: Jan 2008
Posts: 95
Default

Barry, Glad you're back in the shop. Just let you know the Emmett Kelly conversion (4-6-0) that you did for me is still chugging along. Last time it ran it pulled 10 cars for 8 hours without even a hint of trouble. It was pulling 17 cars a year ago and the only problem I had was that the couplers on the cars kept coming undone. Thanks for the great work.

Also, I was wondering if your still making the motor replacement for the Bachmann Connie?

Last edited by reeveha; 07-06-2017 at 01:05 PM. Reason: add content
reeveha is offline   Reply With Quote Quick reply to this message
Old 07-06-2017, 06:15 PM   #6 (permalink)
Senior Member
 
Totalwrecker's Avatar
 
Join Date: Feb 2009
Location: Vail AridZona
Posts: 6,042
Default

Quote:
Originally Posted by reeveha View Post
Barry, Glad you're back in the shop. Just let you know the Emmett Kelly conversion (4-6-0) that you did for me is still chugging along. Last time it ran it pulled 10 cars for 8 hours without even a hint of trouble. It was pulling 17 cars a year ago and the only problem I had was that the couplers on the cars kept coming undone. Thanks for the great work.

Also, I was wondering if your still making the motor replacement for the Bachmann Connie?


Near the bottom: "I also produce a replacement drive for the Bachmann 2-8-0 consolidated locomotive."
JC
__________________
Happy Rails,
John


His friend Jerry Dillon looked up at the hillside and said; There is a big ledge, and the whole damned hill is a total wreck with quartz boulders of ore.
Totalwrecker is offline   Reply With Quote Quick reply to this message
Old 07-09-2017, 02:07 AM   #7 (permalink)
Junior Member
 
Railroadinovations's Avatar
 
Join Date: Feb 2009
Location: E.Helena, MT
Posts: 23
Default

ThinkerT,
I called Barry and let him know you are sending some units over to him and he will be watching out for them. I am not sure but I think you and him may have spoken recently. If not, feel free to contact him at the above number.
Remember now I am responding for Barry at his request because his Internet connection is not up and running and hasn't been for a while due to location issues but it is being worked on at this time. He has ask me to help him out with contacting and updating the public as we have been close friends for a lot of years.
I apologize for the late response but we get kinda busy and of course the holiday didn't help.

Mike,
Good to hear from you! Our program has purchased equipment in the past from Reindeer Pass and we still run it for the public.
Barry says if you or anyone else you come across needs anything for Barry's previously constructed locomotives or a new drive, feel free to contact him at the number above.

Reeveha,
Barry said to let you know that he makes the complete new drive for the Connies and not just the motor. It's a super powerful drive using his parts and metal frame.
They're really nice and extremely durable.
If you're interested give him a call at the number above.

Totalwrecker,
Barry asked for your name but profiles don't always give that.
Barry says he may know you but your sure welcome to give him a call.

Hope that helps everyone. We'll try to have a faster response now that things are slowing down a bit!
Thanks guys! Ken
Railroadinovations is offline   Reply With Quote Quick reply to this message
Old 07-09-2017, 05:45 AM   #8 (permalink)
Senior Member
 
Join Date: Jan 2008
Location: Alaska
Posts: 934
Default

Quote:
ThinkerT,
I called Barry and let him know you are sending some units over to him and he will be watching out for them. I am not sure but I think you and him may have spoken recently. If not, feel free to contact him at the above number.
Remember now I am responding for Barry at his request because his Internet connection is not up and running and hasn't been for a while due to location issues but it is being worked on at this time. He has ask me to help him out with contacting and updating the public as we have been close friends for a lot of years.
I apologize for the late response but we get kinda busy and of course the holiday didn't help.
We spoke on the phone before I mailed the locomotives. Apparently, I am his first Alaskan customer, though he has been in this state before.
ThinkerT is offline   Reply With Quote Quick reply to this message
Old 07-09-2017, 03:20 PM   #9 (permalink)
Junior Member
 
Railroadinovations's Avatar
 
Join Date: Feb 2009
Location: E.Helena, MT
Posts: 23
Default

Thanks for the update! I'll inform Barry, if he hasn't received the locomotives yet.
All the best!
Ken
Railroadinovations is offline   Reply With Quote Quick reply to this message
Old 08-16-2020, 07:52 PM   #10 (permalink)
Junior Member
 
Join Date: Apr 2020
Posts: 9
Default

Is Barry still around? I tried calling this number but it didn't work
gdtmsailor is offline   Reply With Quote Quick reply to this message
Reply

Tags
2-8-0, barry's big trains

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the myLargescale.com > Community > Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Barry's Big Trains lownote Rolling Stock 54 10-31-2016 11:40 AM
Barry's Big Trains has shut its doors RIrail Public Forum 42 08-10-2015 12:50 PM
Praises for Barry Olsen and the BBT Connie Drive Gary Armitstead Product Reviews 3 02-12-2012 02:15 PM
New front truck Barry's Big Trains skypup Product Reviews 2 12-30-2009 03:26 PM

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 03:12 PM.



Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.