myLargescale.com > Community > Forums

myLargescale.com > Community > Forums (https://forums.mylargescale.com/)
-   DCC in Large Scale (https://forums.mylargescale.com/39-dcc-large-scale/)
-   -   Marklin decoder on old LGB MTS system (https://forums.mylargescale.com/39-dcc-large-scale/90660-marklin-decoder-old-lgb-mts-system.html)

Dan Pierce 07-11-2020 07:30 AM

Marklin decoder on old LGB MTS system
 
Yesterday I helped a friend in making the newly acquired LGB/Marklin engine work on his old LGB MTS (55005 P ) system. I brought over my Zimo system and made some necessary changes.


lights not working CV 29 needs to be a 4 to enable 14 speed steps in the decoder
CV50 needs to be a 2 to disable MFX and leave only DC and DCC turned on
Newest engine was slow to speed up and slow down, changed cv 3 (accel to 8) and de-accel cv 4 to 4. Now if a crash is possible, the engine can slow down and stop in a short space, not 6 feet when turning speed to zero/off.


All times are GMT -4. The time now is 06:54 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 06:54 PM.



Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.