myLargescale.com > Community > Forums - Reply to Topic

Thread: USA trains Heavyweights Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the myLargescale.com > Community > Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Additional Options
Miscellaneous Options

Topic Review (Newest First)
08-27-2020 09:46 PM
Greg Elmassian Thank you!


Sorry, forgot the height, duh! We would refer to that as code 200, yes, the flanges were probably riding on the "spikes".


I try to shoot for 2mm flange depth myself...


Greg
08-27-2020 05:37 PM
derPeter Hallo Mr. Greg,
wheel flange originally is 3mm depth, so i turned down to 1,8mm depth to enable run on track with 5mm height (Euro-Standard, Märklin and others)
greetings derPeter
08-27-2020 04:51 PM
Greg Elmassian What do you mean about the wheel flanges, did you turn down the flange width or depth?


what does "run at 5mm track" mean? Surely your track is not 5mm wide.


In any case, your coupler mount is very much like the Camarillo Pacific ones, of course, a good solution.




Thank you for the tip on the bearings. I'm going to take a different route because I want power pickup, but the friction losses I am seeing are coming from the carbon brushes, so converting to Train-Li ball bearing wheels with the power pickup and eliminating the carbon brushes.


Greg
08-27-2020 03:58 PM
derPeter Hallo again,
got some small ballbearings 1/4" x 1/8" (6,35 x 3,175 x 3mm)
only 8pcs. per car, because the middle axe is loose.
The brass bushing can be easy removed with M3 thread tap.
Axle has 2,8mm dia, so i made small sleeve from alu-sheet, see pic
And added the kadees #820
Greetings derPeter
07-24-2020 03:00 PM
Greg Elmassian People have also put Kadees "inside" that u-shaped bridge.


The short wires are indeed a pain in the butt.


with the nice electronics, you can easily eliminate one set of pickups, and the reduction in rolling friction is dramatic.


My buddy and I both bought the 10 car set (I run 12 cars) and stringlining has been an issue with the rolling friction.



Camarillo Pacific makes the Kadee mount.


We are going to change the carbon brush pickups to ball bearing pickups.


They are great looking cars, except for the threaded bolt visible in the center of the observation car


Greg
07-23-2020 10:42 AM
derPeter
USA trains Heavyweights

Hallo MLSers,
i have got my 5 UP-cars and they did not fit with the aristos in height.
Couplers are too low, so i made new holding device.
Trying to remove the truck, there are the 2 wires for light going thru the truck. so i had to unsolder. Also turned the wheelflanges to 2mm to run at 5mm track, see the pics..
Greetings derPeter

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 08:17 PM.



Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.